Asking price of $32,900 is LESS engine.
Turn Key asking price is $43,900
I am open to a reasonable cash offer or your cash and trade.
Please see photos at http://imgur.com/a/IoYy1
Many more details at http://rodplans.com/ click on the photo of the coupe on the right side to go to the detail page
1937 Streetrod Gasser coupe
The car has been featured on discovery channel’s show daily planet and has appeared in several publications as well as some promotional materials for the local race track.
Do not let the photos fool you this is not a race only car. It is a street rod built to high standards to look & perform like a 1960’s gasser. It will take you to the cruise night or with the addition of a set of slicks run the quarter mile in under 10 seconds.
Lettering is on top of the clear coat which I believe will permit it to be removed without re-painting the car.
Roll bar is bolted in to NHRA specifications.
Tires are new street tires.
The car will and has consistently turned 9.9s @ 130 + mph in the quarter mile using pump gas and the blower under driven. I have video files as to proof of the cars performance.
565 CI BBC full roller engine with aluminum heads and supercharged with an 8-71 roots type blower
The blower and engine has a grand total of six (6) quarter mile passes (shifting at 5500 rpm) and less than 100 street miles.
Trans - Glide C/W transbrake , hardened shafts - ATI fuel and Blown converter - TCI shifter
Fabricated Ford 9” from Chris Alstons chassis works (sold as “Fab 9) . Housing is a brand new piece that has been custom fabricated from scratch complete with a full back brace, fill and drain ports.
Two sets of Strange engineering axles are included Set one: 35 spline “Pro- race” axles Set two: 31 spline street / strip axles.
Two differential “pumpkin” assemblies are included: Pumpkin one: Strange engineering Pro Iron case / 35 spline spool / 4.11 gear ratio / Aluminium pinion support. Pumpkin two: Ford heavy duty 31 spline limited slip with 3.36 ( may be 3.56 I do not remember) gear ratio.
Strange engineering 3” Chrome moly Driveshaft complete with oversized 1350 U joints
Lots more details at Rodplans.com
Wheels & Tires
Rear: Halibrand 16 x 12 genuine magnesium wheels (from a 1960s funny car) C/W 345/55R/16 BF Goodrich Sport truck radials
Front: ET Gasser 10 spoke 15 x 4 C/W 155/80R/15 BF Goodrich Radial T/A tires
All tires have had so little use that the molding bumps are still on the treads.
Clear anodized aluminum panels with custom decorative bead rolling.
Full complement of Autometer Pro-Comp gauges including a data recording Playback tachometer
Disc front brakes
NRHA legal DOM tube six point triangulated roll cage.
Five point safety harnesses for both driver and passenger.
I will provide a coupon to the purchaser enabling him to have the drivers harness re-certified for free.
Transmission safety shield SFI certified
Flywheel safety shield SFI certified
Harmonic balancer SFI certified
Driveshaft loop to NHRA specs
All wheel studs extra high strength - double length
More Photos at http://imgur.com/a/IoYy1